3S1P 18650 10.8V Li-ion Battery Pack 2600mAh Wires Out with Fuel Guage smBus
Built-in IC chip will prevent battery pack from over charge,over discharge, over current and prolong battery life, with SMbus
| Item |
Specification |
| Model |
3S1P/UR18650ZY |
| Nominal Capacity |
2600mAh |
| Nominal Voltage |
11.1V |
| Charging Voltage |
4.2V |
| Charge Current |
0.2C std.
0.5C rapid |
| Standrad Discharge Current |
0.2C |
| Maximum Discharge Current |
1.0C |
| End Voltage of Discharge |
7.50V |
| Cycle Life |
>500cycles |
| Weight |
148g max. |
| Size (max.) |
69.0(L)*19.0(W)*54.0(H)mm |
| OEM |
Available |
Made of 2pcs of Sanyo UR18650ZY 2600mAh cylindrical 18650 cell with PCB for full protection
Perfect for building 3.7V battery pack for bike lighting, RC toy (cars and airplanes), robots, cameras, speakers, medical equipment and other portable devices.
Battery pack support System Management Bus (SMBus) protocol.
There is a distinct SMBus for each section. The following data can be available through SMBus.
State of charge
Battery temperature
Cell voltage
Current drawn from the cells
Failure messages
Charging status
